Built in Japan in 1976, Al Khubar 3 (later "Flat Holm") was a harbour tug later converted to dredging and survey work. Model Slipway kit.

Italian steam tug boat; Model: Allan Read; Kit: Mantua Models.

A pre "1939/1945" war Italian port tug, model Alan Furness. (Alan's Comments)

Wijsmuller harbour tug; Model: Allan Read.

"Bitsa" tug, a model made from Bits and pieces and still being built; model: Ken Dyer.

Harbour tug; Model: Barry Thomas.

A model of a US diesel river tug. Model: Peter Gargan. (Peter's Comments)

Scratch built; Model: Chris Chattaway (Chris's comments)

Tug built in Birkenhead in 1981 and until 1999 split her time between the Mersey and Cabinda in Angola as part of an ongoing contract. Eldergarth is now on the Clyde under the name Shannon. Kit: Mobile Marine Models; scale: 1:32; Model: Ian Povey.

Steam tug built by Ferguson Bros. Shipbuilders Ltd in Glasgow, Scotland. Model restored by Peter Soffe and now owned by Ian Holliday. (more...) Model: Peter Soffe.

Built by Muetzelfeldtwerft, Cuxhaven, in 1976 and operated by Alexandra Towing Co. Model: David Boothroyd

Dutch ocean-going salvage tug built for the Mammoet Maritime Company. Model: Allen Kaye; Kit: Robbe; Scale 1:50.

Harbour Tug; model: Barry Thomas.

Harbour Tug; model: Harold Hartigan.

Harbour Tug; model: Cliff Newell.

Model: Paul Nixon.

Model: Dennis New

Historic San Francisco Tug with (in the original) a gas (i.e. petrol) engine. Model: Terry Spurge. (Terry's Comments)

Le Havre based harbour tug; Model: Mike Hammond; Scratch Built.

Ocean going tug built by Robb Caledon (Shipbuilders) Leith for United Towing Ltd. Hull; Model: Ray Hellicar.

Marie Felling Sea Going Tug. This ship operated off the coast of South Africa in the 1920's; Model: Gordon Hawkins; Kit: Caldercraft.

Allan Read's "Muimota" - an Italian ocean-going tug.

Phoenix 2; Ocean going tugboat; model: Barry Thomas.

Ocean going tugboat still being built; model: John Frost.

Ocean going tug (in build); model: Harold Hartigan

Harbour Tug; Model: John Cooper; Kit: Robbe (plus scratch build), Scale 1:25. (John's Comments)

Paddle Steamer Tug; Model: Ralph Stockton.

Paddle wheel tug operated by the Clyde Towing Co.; Model owned by Rex Harris, renovated and operated by Allen Kaye.

Tug built from the Model Slipway kit of the Al Khubar; model: Richard Densham.

General Purpose Work Boat. Model: Lorna and Andrew Soffe; Kit: Robbe. (Lorna and Andrew's comments)

The Club's new Rescue Vessel is named "Phoenix" in recognition of it having been the first model Ken Dyer built after a fire destroyed his workshop and his extensive collection of models in July 2008. (More...) (x2)

Cory Towage (now Wijsmuller Marine) Tug based at Avonmouth, Bristol; Kit: Mobile Marine Models; Scale 1:32. Owner unknown, if it's your model please contact me!

Pusher Tug (in build and built?). Enlarged Springer based hull 25"x11" with car heater blower motors driving twin 60mm props. Superstructure donated by another club member. Model: Alan Bond. The latest movie invites you aboard to view Setley Pond from the water... Alan's comments. (x4).

Pusher Tug, in build; model: Chris Chattaway.

Models owned by a visitor to the Pond. If it's your model please contact me!

Ocean Going Salvage Tug; model: Barry Thomas.

Samson, a Duttch Harbour-River Tug, also used for Pilot Duties; Model: Barry Thomas.

An almost Ready To Run tug model with modified radio gear; model: Roger Yeatman.

Built in 1979 at the BV Scheepswerft & Machinefebriek; Model: Peter Oram; Kit: Billings Boats; Scale 1:33.

St Canute; Built by Mac Winter from a Billings kit.

St Canute; Built by David McNair Taylor from a Billings kit and with a Graupner smoke unit. Now owned by Peter Taylor. Peter's Comments.

A paddle wheel driven steam tug owned by a visitor to the pond. If it's your model please contact me!

Model: Peter Soffe.

Apparently Ralph constructed this tug for his young son... who is now 42! Model: Ralph Stockton.

Model: Mac Winter

Richard Densham's conversion of a Dickie Workboat Ready to Run (RTR) model. (Richard's Comments) (Build description on Mayhem)

Itchen Marine Tug based in Southampton. Model: Peter Taylor; modified Graupner RTR model.(Peter's comments).

A Ready to Run model sold as "Southampton" but actually the Itchen Marine tug "Wyeforce" which operates in Southampton; Model: Peter Soffe.

Ocean Salvage Tug; Model: David McNair Taylor; Kit: Model Slipway; Scale: 1:48. (David's Comments)

Ocean going towing/salvage tug; Model: Don Brazier.